| Introducing the Fiddle Pro. The best sounding, easiest
to use, performance fiddle microphone for the working musician to the
studio professional. |
| |
 |
| |
| Simply clip it on, plug it in to your sound system and
play. Listeners will be spellbound at the clean and natural sound of
your Fiddle Pro. |
Fitting the Fiddle Pro precisely to your instrument is easy and simple,
as shown here:
 |
| The microphone is attached to the C bout of the violin
by an adjustable unique system that is guaranteed to fit your violin
perfectly. |
| |
 |
| |
| Simply turn each adjusting screw with the handy
screwdriver provided until the width of the Fiddle Pro system fits your
violin nicely. |
 |
| |
| Once the microphone is adjusted, simply squeeze and clip
into place. Rotate microphone over the sound hole and enjoy the sound of
the Fiddle Pro. When you're done, simply squeeze and remove. It's that
easy! |
| |
| A directional hyper-cardiod microphone is used in close
proximity to the instrument to capture maximum sound level and minimize risk of feedback. |
| |
| A miniature high quality connector feeds the signal to your
mixer / amp microphone input via a 5 metre long cable and male XLR connector.
Custom cable lengths and connectors available on special order as well. |
| |
| The micro-electronics in the connection block provides power
management, impedance matching and an amplified balanced output. (For 600 ohms standard
microphone input). |
| |
| Will operate from Phantom Power if available (switches
automatically from battery to phantom. |
| |
| An on-board 3-volt coin cell battery powers the microphone if
phantom power is not available. |
| |
| The device does not interfere with bow movement, is light in
weight (70g) and is unobtrusive. |
| |
| Absolutely no modification to the instrument is required, no
stick on pads etc. |
| |
 |
| |
| After your performance the device can be removed in less than
a second, and then store in the purpose-built foam-filled box provided. |